Instrumentation Training Including PID Control

Industrial Instrumentation for Industry. What you’ll learn This is for anyone involved in the Industrial INS. and Control System field. They will learn the various types of measurement for the different information required and how to implement them. Requirements Some …

User Avatar
(1 review)

Industrial Instrumentation for Industry.

What you’ll learn

  • This is for anyone involved in the Industrial INS. and Control System field. They will learn the various types of measurement for the different information required and how to implement them.
Requirements
  • Some basic Instrument knowledge would be an advantage but not an absolute. Inexperienced INS. personnel will also benefit.
Description

This course Instrumentation Training Including PID Control is for any of you who require the knowledge to design, install and maintain INS. systems throughout their operation.

My name is Jeff Sharman and I shall be your instructor during this training. I have had many years practical experience in all aspects of INS. as well as training both face to face and On-line.

The course will start by giving you a general introduction to all the aspects that will be discussed..

Who should Take This Course?

  • This course, Instrumentation Training Including PID Control is designed for anyone already in the INS. field and wish to enhance their knowledge further and feel confident to maintain, commission and select the correct device for the application
  • For anyone who is planning on entering the INS. field in the future, then this is a must have.. Listed below are some of the topics I will cover with you in this course.•  Introduction to INS. for Measurement and Control.•  Pressure Measurement.•  Level Measurement.

    •  Temperature Measurement.

    •  Flow Measurement.

    •  PID Control Including Loop Tuning.

This is just a short description explaining what you will learn and it is very comprehensive. So take the course Instrumentation Training Including PID  Control.

There are a number of quizzes that you can complete after each section to help you reinforce your knowledge and gain confidence.

Once you finish the course, you will receive a certificate of completion.

The majority of the course consists of video tutorials where I will explain all the different aspects of Instrumentation and PID Control  and demonstrate how it can be used.

The more you understand, the better you will be,

So if you are really serious about learning, Enroll Today.

Who this course is for:

  • All personnel involved in Instrumentation at all levels of knowledge.

 

Download Course PDF :    Download the file

Find More Courses Home

Course Curriculum

Total learning: 15 lessons Time: 4 hours

    001-Introduction 1

    • Lecture.1
      PID-001-001. Introduction

    002-introduction to instrumentation for measurments and control 1

    • Lecture.1
      PID-002-001. Detail Introduction to Instrumentation.

    003-Pressure Mesurments 1

    • Lecture.1
      PID-003-001. Pressure Measurement Explained.

    004-Level Mesurments for indutrial application 2

    • Lecture.1
      PID-004-001. Level Measurement for Industry, Lesson One.
    • Lecture.2
      PID-004-002. Level Measurement for Industry, Lesson Two.

    005-Temperature mesurment 2

    • Lecture.1
      PID-005-001. Temperature Measurement. Lesson One.
    • Lecture.2
      PID-005-002. Temperature Measurement. Lesson Two.

    006-Flow Measurments 5

    • Lecture.1
      PID-006-001. Flow Measurement. Lesson One. Types of Flow, Terminology.
    • Lecture.2
      PID-006-002. Flow Measurement. Lesson Two. Differential Pressure Flow Measurement.
    • Lecture.3
      PID-006-003. Flow Measurement. Lesson Three. Venturi Tube, Pitot Tube and Annubar.
    • Lecture.4
      PID-006-004. Flow Measurement. Open Channel, Rotameters, Vortex Shedding Meters.
    • Lecture.5
      PID-006-005. Flow Measurement. Turbine, Positive Displacement, Mag flow. Ultra-sonic Flow.

    007-PID Control Explained 3

    • Lecture.1
      PID-007-001. PID control. An explanation of the different types of control and tuning methods
    • Lecture.2
      PID-007-002. Closed Loop Tuning While in Auto.
    • Lecture.3
      PID-007-003. Open Loop Tuning While in Manual.

ABOUT INSTRUCTOR

Reviews

Average Rating

3
1 rating

Detailed Rating

5 stars
0
4 stars
0
3 stars
1
2 stars
0
1 star
0
  • Good

    Goof

Leave A Reply

Skip to toolbar